DUNLOP MANCHONS – Dunlop Conveyor Belting
EnglishEspañolFrançais

Special Products

DUNLOP MANCHONS

Inner Rubber Linings

The users have to be absolutely certain that the hose will not let them down at a critical moment. The failure of a high-pressure hose during operation can be life-threatening. Safety must always be paramount. There can be no compromise whatsoever when it comes to the dependability and quality of the end product.
Dunlop Manchons are designed for use in a variety of hoses that have fabrics with different types of yarn including polyester and nylon. This means that they can be used for a wide range of applications. Using an almost identical process to that used for Dunlop EPDM Manchons, Dunlop Manchons are also available with oil and chemical resistant rubber. More detailed information on the different kinds of oils and chemicals is available on request.

BENEFITS THE KEY ADVANTAGES OF THE DUNLOP MANCHONS

  • Low friction loss as a result of the two-component system (low distortion of the liner surface due to the refashion ability of the adhesion layer during curing);
  • Clean processing;
  • Solvent and solution free processing;
  • High flexibility;
  • Long shelf life;
  • A large variety of deliverable dimensions;
  • Excellent mechanical properties including tensile strength, elongation at break, abrasion resistance and permanent set;
  • Outstanding ageing properties when exposed to high or low temperatures; U. V.– radiation, Ozone, Seawater or Chemicals.

 

TECHNICAL INFORMATION

STANDARD DIMENSIONS AND WEIGHT

Liner thickness: 0.55 mm (-0.05/+0.05) | Adhesion layer thickness: 0.25 – 0.35 mm | Total thickness: 0.85 mm (-0.10/+0.10).
More technical information available in the product brochure below.

ADHESION LAYER

The adhesion layer gets its mechanical properties during the vulcanization process. The adhesion level of the Dunlop Manchons will primarily depend on heat transfer (type of curing equipment), yarn type, fabric construction, moisture content of the fabric, cure time, temperature and pressure. The optimum adhesion results are obtained with adhesive activated polyester (PES) or nylon (PA) yarns (3 to 5 N/mm). Generally, mixed fabrics (bare polyester in the wrap and adhesive activated polyester in the weft) are used and give excellent adhesion results (2 to 4 N/mm).

 

Belt characteristics

Specialist


Resistance

  • Cold resistance
  • Heat resistance
  • Ozone & UV resistance
  • Special demands

When you buy Dunlop
you also buy peace of mind

Read more about our products

Get your Dunlop Belt Buddy app!

Get your Dunlop Belt Buddy app!

Our technical calculators include belt thickness and weight, roll size and belt length from a coiled roll, also transition distance and convex curve lay-out, even motor power and capacity calculations.

Download for Android Download for iOS
Menu
Dunlop Conveyor Belting
Dunlop Conveyor Belting
The Longest Lasting Conveyor Belts

We use cookies to optimise the website, show targeted advertisements and collect statistics. By using our website you automatically agree to the use of cookies. You may change the settings on the Privacy Settings page at the bottom of the website at any time.

Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

In order to use this website we use the following technically required cookies
  • wordpress_gdpr_cookies_declined
  • wordpress_gdpr_cookies_allowed
  • pll_language
  • zoomed
  • wordpress_test_cookie

Decline all Services
Accept all Services